plates
OVERPIPE offers high-quality HDPE plate that provide safety of underground networks like High-Pressure pipeline, Medium-Pressure pipeline, High-Voltage electricity grids, etc.
This is a major breakthrough to protect pipelines from third-party interference damage as it acts as a physical barrier. In addition, the OVERPIPE plates lend mechanical protection and underground network safety.
Works by third parties represent the greatest danger for underground pipelines, causing approximately 40% of accidents.
OVERPIPE plates are fully compliant with French regulations regarding mechanical protection (GESIP guides 2008/02). They provide a risk reduction factor (0.01) equivalent to that of concrete slabs (GESIP guide 2008/01).
OVERPIPE plates for underground pipeline protection and high voltage electrical networks are quick and easy to install. The plates act as an impenetrable barrier and protect buried networks from the impact of the excavator bucket.
SAFETY
Improved safety thanks to the non-slip surface and bevelled edges. They are covered on both sides with non-slip spikes to make them easier to handle and avoid slip and fall accidents.
RESISTANCE
The plates form an impenetrable barrier against impact from the bucket of an excavator.
inspection
The plates can be removed to allow the pipeline to be inspected or repaired.
WARNING MESSAGE
The plates are full body coloured (anti-UV treated), in order to provide an unmissable warning signal (colour depending on the nature of the network). They include an embossed warning message. Included in the mould, its lifetime is that of the plate. It can be fully customised.
dimensions
The dimensions of the plates are broken down into five formats to adapt to the diameters of the pipelines and to the route of the network.
drainage
They have holes over their entire surface for water drainage and so as not to disrupt the measurement of the cathodic protection.
INSTALLATION
OVERPIPE plates are particularly quick and easy to install: they require no heavy equipment or qualified personnel. A team of two people can install several hundred meters per day.
SAFETY
Improved safety thanks to the non-slip surface and bevelled edges. They are covered on both sides with non-slip spikes to make them easier to handle and avoid slip and fall accidents.
ReSISTANCE
The plates form an impenetrable barrier against impact from the bucket of an excavator.
inspection
The plates can be removed to allow the pipeline to be inspected or repaired.
WARNING MESSAGE
The plates are full body coloured (anti-UV treated), in order to provide an unmissable warning signal (colour depending on the nature of the network). They include an embossed warning message. Included in the mould, its lifetime is that of the plate. It can be fully customised.
dimensions
The dimensions of the plates are broken down into five formats to adapt to the diameters of the pipelines and to the route of the network.
drainage
They have holes over their entire surface for water drainage and so as not to disrupt the measurement of the cathodic protection.
INSTALLATION
OVERPIPE plates are particularly quick and easy to install: they require no heavy equipment or qualified personnel. A team of two people can install several hundred meters per day.
PROTECTION OF TRANSPORT NETWORKS
The plates are intended to protect large-diameter underground pipelines (HP gas, hydrocarbons, etc.) Made of injected HDPE, they can withstand the impact of a 32-tonne mechanical digger without losing their integrity.
French regulations give OVERPIPE plates a risk reduction coefficient of 0.01, identical to that of concrete slabs (GESIP guide 2002/01).
reference
dimensions (mm) L x l x e
weight (Kg)
bonding
coulour
Embossed warning message
OV1
1800x1250x15
33
Overlapping, or end-to-end
full yellow body (other colours on request)
Customisable
OV2
1800x1400x15
36
Overlapping, or end-to-end
full yellow body (other colours on request)
Customisable
OV3
1800x1500x15
39
Overlapping, or end-to-end
full yellow body (other colours on request)
Customisable
OV4
1600x1800x15
41
Overlapping, or end-to-end
full yellow body (other colours on request)
Customisable
OV4
1800x1600x15
41
Overlapping, or end-to-end
full yellow body (other colours on request)
Customisable
reference
OV1
dimensions (mm) L x l x e
1800x1250x15
weight (Kg)
33
bonding
Overlapping, or end-to-end
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
reference
OV2
dimensions (mm) L x l x e
1800x1400x15
weight (Kg)
36
bonding
Overlapping, or end-to-end
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
reference
OV3
dimensions (mm) L x l x e
1800x1500x15
weight (Kg)
39
bonding
Overlapping, or end-to-end
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
reference
OV4
dimensions (mm) L x l x e
1600x1800x15
weight (Kg)
41
bonding
Overlapping, or end-to-end
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
reference
OV4
dimensions (mm) L x l x e
1800x1600x15
weight (Kg)
41
bonding
Overlapping, or end-to-end
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
PROTECTION OF DISTRIBUTION LINES
OVERPIPE has extended its range of HDPE protection plates, and offers narrow plates, designed to protect small-diameter pipelines, such as distribution lines.
reference
dimensions (mm) L x l x e
weight (Kg)
bonding
colour
Embossed warning message
OV5
1500x570x15
12
end-to-end or side-by-side
full yellow body (other colours on request)
Customisable
OV6
1500x820x15
17
end-to-end or side-by-side
full yellow body (other colours on request)
Customisable
OV7
1500x500x15
10,50
end-to-end or side-by-side
full yellow body (other colours on request)
Customisable
reference
OV5
dimensions (mm) L x l x e
1500x570x15
weight (Kg)
12
bonding
end-to-end or side-by-side
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
reference
OV6
dimensions (mm) L x l x e
1500x820x15
weight (Kg)
17
bonding
end-to-end or side-by-side
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
reference
OV7
dimensions (mm) L x l x e
1500x500x15
weight (Kg)
10,50
bonding
end-to-end or side-by-side
colour
full yellow body (other colours on request)
Embossed warning message
Customisable
PROTECTION OF CABLE NETWORKS
OVERPIPE has extended its range of mechanical protections, and offers narrow plates, designed to protect high voltage electrical networks. Resistance to permanent exposure to a temperature of 60°C is offered as an option.
reference
dimensions (mm) L x l x e
weight (Kg)
bonding
colour
Embossed warning message
OV5
1500x570x15
12
end-to-end or side-by-side
full red body (other colours on request)
Customisable
OV6
1500x820x15
17
end-to-end or side-by-side
full red body (other colours on request)
Customisable
OV7
1500x500x15
10,50
end-to-end or side-by-side
full red body (other colours on request)
Customisable
reference
OV5
dimensions (mm) L x l x e
1500x570x15
weight (Kg)
12
bonding
end-to-end or side-by-side
couleur
full red body (other colours on request)
Embossed warning message
Customisable
reference
OV6
dimensions (mm) L x l x e
1500x820x15
weight (Kg)
17
bonding
end-to-end or side-by-side
couleur
full red body (other colours on request)
Embossed warning message
Customisable
reference
OV7
dimensions (mm) L x l x e
1500x500x15
weight (Kg)
10,50
bonding
end-to-end or side-by-side
couleur
full red body (other colours on request)
Embossed warning message
Customisable
